You wall-mounted your monitor for a clean battlestation, but now a power cord and a video cable hang in plain view. Your job is to pick a surface raceway system that hides that drop without opening the wall. Start with what your resolution and refresh target demand for cables, your platform and mount height, your case size and clearance below, your power budget for a dock or hub, and whether you are wiring for your current gear or your next upgrade.
This buying guide explains how to hide the cable from a wall-mounted monitor step by step, so you buy the right width, length and fittings the first time. You will learn how to size capacity, plan length and corners, and choose renter friendly adhesion and paintable finishes. For more ideas in the same project family, browse our Cable Management & Under-Desk guides while you plan your route.
What Actually Matters
Count Every Cable and Respect Interior Space
Before you shop, lay out everything that must travel from your monitor to the outlet or PC. A basic setup might be one power cord plus one HDMI cable, while a work from home monitor might add USB-C, Ethernet, or a speaker cable. Your bundle thickness decides everything, because a slim cover sized at W0.59in x H0.4in suits a single cord, while wider options at W0.94in x H0.55in, W1.18in x H0.6in, and W0.96in x H0.57in give you room for more.
Look closely at interior room, not just exterior size. One design lists an internal length of 1.1in and an internal width of 0.52in and is described for 3 to 4 wires depending on wire size, while other designs are described for 2 to 3 cords or for 1 cord plus room for 2 tiny wires like 2 USB leads. Give yourself slack so the lid slides or snaps shut without force, and leave room for one future cable if you plan a dock, webcam, or second input.
Match Drop Length and Fittings to Your Wall Route
Measure straight down from the bottom of your monitor to your outlet, desk, or baseboard, then add a little extra for gentle entry and exit. Example options in this class include a 42in cover, a 70.8in set built from 5pcs where a single piece measures 14.17in L, a 116in kit, and a kit with 6 pre-cut straight raceways for flexible layouts. If your drop is short you can cut down, but if it is tall you want enough pieces plus joints for a seamless look.
Straight sticks alone rarely make a clean install. You want couplings for joining lengths, plus elbows for turning toward an outlet and a T-connector or T-fitting for splitting toward a PC on one side and power on the other. Kits that include 6 couplings with 2 L-elbows, or 2 flat elbows with 1 T-connector, help you avoid gaps at corners. Sketch your path on paper first, then confirm you have a fitting for every turn.
Check Wall Texture and How the Cover Attaches
Most wall raceways in this group use pre-applied tape with a peel and stick install and no drilling, which is ideal for rentals and painted drywall. Designs with snap-on and slide-on lids are easier to live with in tight spaces under a monitor, because you can pop the cover to add or swap a cable without pulling the whole base off the wall. That access matters when you change inputs or reroute a charger.
Your wall finish decides success. Tape should not be used on textured walls, and dusty or uneven paint can weaken the bond, so clean the path and use smooth flat paint for best hold. If the white plastic stands out, choose a paintable surface and color match your wall for a near invisible line. If a stick is too long, you can cut it shorter with sharp scissors or a saw and sand the edge smooth.
Weigh Safety, Material and Everyday Access
You are covering power plus low voltage video and USB, so material quality counts. Look for high quality PVC with a UL94 V-0 high flame retardancy rating, which is described as offering higher flame retardancy than ordinary materials for added security in daily use. A closed cover also hides exposed wires from curious kids and pets, which helps reduce accidental touch, chewing, tangling and tripping around your setup.
Think about how the system looks after a month, not just on day one. A stylish, paintable profile blends with baseboards and TV walls, while a bulky or glossy channel draws the eye. Per the spec sheet, researched owner notes praise easy tool-free use and quick installs, but also point out that overstuffing makes lids pop. Choose a size you can open, close and repaint without a fight. For ambient upgrades after concealment, explore Bias Lighting & Ambient RGB ideas that pair well with hidden wires.
To see how those tradeoffs look in practice, here are a few options that show the range from slim single cord covers to long multi piece kits:
This article contains affiliate links. If you buy through one of our links, CustomPCGaming may earn a commission at no extra cost to you. Commissions never influence which products we recommend or how we rank them. Read our Affiliate Disclosure for details.
Quick Picks at a Glance
Prime Yecaye TV Cord Hider 42in White Cable Raceway
Prime Delamu One-Cord Hider Kit
Prime YesBes 116in Cord Hider Kit
Prime Yecaye 70.8in White Cord Hider for Wall
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated.
Pros
- Simple tool free self adhesive installation
- Flexible slide on or snap on access, great for tight spaces
- Sections splice seamlessly for custom layouts
- Slim white modern design suits most living rooms and bedrooms
- Large enough for 3 to 4 standard TV cables
Cons
- Indoor use only, not suited for outdoor cable runs
- Limited capacity, may not fit thick cables or large bundles
- Adhesive mount works best on smooth clean walls and may struggle on heavy texture
The Yecaye CMC02 TV Cord Hider is a 42 inch white raceway designed to clean up dangling cables below a wall mounted TV. It is made for renters, apartment dwellers and homeowners who cannot or do not want to run wires behind drywall.
You get flexible coverage with three sections that can be used separately or spliced seamlessly into one long channel. The cover slides on or snaps on, so adding or swapping an HDMI, power or Ethernet cable in tight spaces under the TV is quick and frustration free.
The profile measures 1.18 inches wide with an internal space that fits 3 to 4 standard TV wires. The plastic construction feels lightweight yet sturdy, and the clean modern white finish blends well with most walls and baseboards for a tidy look.
Capacity is best for typical TV setups, so thick cables or large bundles may feel tight. It is indoor rated only and relies on pre applied adhesive, so proper wall cleaning and measuring your cables first will give the best results.
Overall, this is a simple, effective and renter friendly fix for messy TV wires. If you want an affordable, tool free way to conceal cables and improve safety around your entertainment setup, this Yecaye raceway is a smart pick.
Brand: Yecaye, Model: CMC02, Color: White, Style: Modern, Item Type: TV Cord Hider Cable Raceway.
Length: 42 inches total, Outer Width: 1.18 inches, Outer Height: 0.6 inches, Inner Space: 1.1 x 0.52 inches.
Material: Plastic, Installation: Self Adhesive peel and stick, Usage: Indoor, Capacity: 3 to 4 standard TV wires such as HDMI, power and Ethernet.
Measure your cable bundle first to confirm 3 to 4 wires will fit comfortably inside the channel. Clean the wall with a dry cloth and let it dry fully for best adhesive hold.
Plan your layout before peeling the backing, then press each section firmly from top to bottom. Use sections separately for short drops or splice them together for a full length run.
Use the snap on method for quick access and the slide on method for tighter spots under the TV. Add cables one at a time to avoid overfilling and to keep the cover closing smoothly.
Pros
- Quick, renter-friendly self-adhesive installation with no drilling
- Includes elbows and T-connector for flexible corner and split layouts
- Cut to length and paintable for a custom, seamless look
- Flame-retardant PVC adds safety around kids and pets
Cons
- Inner size of 0.45 x 0.33 in fits only one standard cable, not thick power cords
- Adhesive may not hold well on textured, dusty or damp walls
- Slim white PVC can show scuffs and may need painting to match darker decor
The Delamu CC03-6 is a 7.85-foot cable raceway kit designed to conceal a single wall cable for a clean, hazard-free look. It is ideal for renters, parents, pet owners and anyone with a wall mounted TV, lamp, baby monitor or speaker wire to tidy up.
In real use, the kit stands out for its complete layout options with six straight channels plus elbows and a T-connector for corners and splits. The snap-on sliding lids make it simple to add or remove cables, while the pre-applied tape gets the whole run up in minutes.
Built from high-quality PVC with a slim 0.59-inch white profile, the channels feel sturdy yet light and blend well with white walls and trim. The material is UL94 V-0 flame-retardant rated for added peace of mind, and you can cut it to length or paint it to match your decor.
The main limitation is capacity, as the 0.45 by 0.33-inch interior fits one standard cord or two very thin USB wires only. Very thick power cables will not fit, and adhesion can weaken on textured, dusty or damp surfaces without proper prep.
Overall, this is a smart, low-profile solution for single-cord cable management that balances safety, looks and ease of use. If you want a fast, no-drill fix for dangling TV or office wires, this Delamu kit is an excellent pick.
Brand: Delamu, Model: CC03-6, Color: White, Style: One-Cord Hider for Wall Cables
Total Length: 7.85 Feet with 6 Straight Raceways, 2 Flat Elbows and 1 T-Connector
Outer Size: 0.59 in W x 0.4 in H, Inner Size: 0.45 in W x 0.33 in H, Fits 1 Standard Cable
Material: PVC with UL94 V-0 Flame Retardancy, Installation: Self-Adhesive, No Drilling, Indoor and Outdoor Use
Pros
- Tool free self adhesive installation, no drilling or screws needed
- Paintable white finish and cuttable channels for a custom, nearly invisible look
- UL94 V-0 rated for higher flame retardancy than standard plastic covers
- Includes all key connectors for straight runs, corners and T junctions
Cons
- Adhesive backing will not hold reliably on textured or uneven walls
- 0.96 inch width fits only a few thin cables, not large power bricks or thick bundles
- Lightweight plastic look may not match premium metal raceway systems
The YesBes 116in Cord Hider Kit is a wall mounted cable raceway designed to conceal TV power cords, HDMI cables and office wires for a clean, clutter free look. It is a smart pick for renters, new homeowners and families who want a tidy living room or bedroom without drilling holes.
With 116 inches of total channel plus 6 couplings, 2 L elbows and 1 T fitting, you can run straight lines and neat turns around corners and between devices. The strong self adhesive backing installs with a simple peel and stick in minutes, instantly hiding messy cables along baseboards or behind a wall mount TV.
Each channel measures 0.96 inches wide by 0.57 inches high, offering a slim profile that sits close to the wall and blends into modern decor. Made from UL94 V-0 rated plastic, it provides added flame retardancy and durable protection for everyday wiring, while the paintable white finish lets you match it to your wall color.
The kit is cuttable with scissors or a saw, so you can trim lengths for a custom fit, though the narrow interior is best for 2 to 3 standard cables rather than thick bundles. Note that the adhesive tape is not recommended for textured, uneven or dusty walls, where adhesion may weaken over time.
Overall, this YesBes cord cover kit delivers excellent value for anyone seeking a simple, safe and renter friendly way to organize cables. If you need an affordable, paintable and child safe solution for wall mount TVs and home offices, it is an easy recommendation.
Brand: YesBes, Model: B0CYZPD7PZ, Color: White, Style: 116in kit for indoor wall use.
Total Length: 116 inches (9.67 feet), Inner Dimensions: 0.96in W x 0.57in H, Single Channel Length: 14.5in.
Kit Includes: 6 couplings, 2 L elbows, 1 T fitting plus instructions for corners and joints.
Material: Plastic with UL94 V-0 flame retardant rating, Installation: Self adhesive, no drilling required.
Pros
- No drilling or tools needed for installation
- Snap-on and slide-on access makes cable management simple
- Good size for standard TV and home office cable runs
- Paintable finish blends easily with home decor
- Helps create a safer space around kids and pets
Cons
- Slim 0.94in width only fits 2-3 thin cables, not bulky plugs or large bundles
- Adhesive mount may hold less well on textured, dusty or uneven walls
- White PVC style may need painting to match darker interiors
The Yecaye 70.8in Cord Hider is a five piece PVC raceway kit designed to hide 2 to 3 loose cables on walls, baseboards or behind TVs. It is ideal for renters, parents and home office users who want a clean look without drilling.
The standout Snap and Slide lid lets you snap sections open or slide cables in from the end for quick changes. In real use, it handles power cords, HDMI and Ethernet cleanly and keeps tight spots like TV stands and desks tangle free.
Each 14.17 inch channel measures 0.94 inches wide by 0.55 inches high with built in joints for a seamless run. The smooth white PVC feels sturdy for daily use and can be painted to match your wall or trim.
Installation uses included pre cut adhesive tape, so setup takes minutes with no tools. Adhesion works best on smooth, clean walls, and the slim size is not meant for thick extension plugs or large bundles.
Overall, this is a simple, neat and family friendly way to hide everyday wires and reduce tripping and chewing risks. If you need affordable, paintable coverage for a basic TV or desk setup, it is a smart pick.
Total Length: 70.8 inches from 5 pieces, each piece 14.17L x 0.94W x 0.55H inches. Capacity: holds 2 to 3 standard cables.
Brand: Yecaye, Color: White, Material: Polyvinyl Chloride, Style: Self-Adhesive Cord Hider. Mounting: pre-cut adhesive tape, no drilling required.
Best For: wall mounted TVs, home offices, bedrooms, baseboards and TV stands. Finish: smooth and paintable for custom color matching.
Matching a Part to Your Build
If you run a minimalist single wire wall monitor, focus on slim and discreet. The Delamu Cord Hider, Cord Covers for Wires on Wall is built around 6X W0.59 H0.4in sticks designed to hide 1 cord, or 2 tiny wires like 2 USB leads, and it includes 2 flat elbows plus 1 T-connector for neat corners. It suits a power cord, lamp cord, baby monitor cord, HDMI, Ethernet cord or speaker cable when you truly have one main line. The con is real: it is not the right pick if you try to force a thick power brick lead plus two video cables inside, because the lid will not close cleanly.
If you run a gaming or hybrid work setup with two or three leads, step up in width and plan for access. The Yecaye 70.8in Cord Hider for 2-3 Wires on Wall measures W0.94in H0.55in per stick and comes as 5pcs with 5 pre-cut adhesive tapes, with a snap and slide design that owners commonly report as handy for HDMI, Ethernet and power changes in tight areas. For a slightly wider single run, the Yecaye TV Cord Hider, 42in Cord Cover Wall measures W1.18in H0.6in with 1.1in internal length and 0.52in internal width for 3 to 4 wires depending on size. Both are paintable and tool-free, but neither is ideal for long floor to ceiling drops on its own, so measure your full distance first.
If your monitor sits high on a living room or office wall with an outlet far below or off to the side, prioritize total length and fittings. The 116in Cord Hider Kit, Cord Covers for Wires provides 116 inches of W0.96in X H0.57in channel with 6 couplings, 2 L-elbows, 1 T-fitting and instructions for maximum concealment. You can cut it with scissors or a saw and paint it to match, which helps on long vertical runs. The tradeoff is adhesion: strong peel and stick works on smooth walls, but it is not recommended for textured walls, so renters with orange peel or brick should plan a different path. Pair a finished run with soft glow from 8 RGB LED strips for a corner desk glow or review how to choose LED desk lighting for eye comfort to keep light and power routes separate.
Common Mistakes
• Buying too narrow for your bundle. A one-cord profile cannot comfortably hold a chunky monitor power lead plus HDMI plus USB, and cramming leads to bowed lids and popped joints. Count every cable, include connector heads in your mental stack, and move up to a 2 to 3 cord or 3 to 4 wire size when in doubt.
• Ignoring wall texture and prep. Peel and stick tape bonds well to clean, smooth painted drywall, yet it should not be used on textured walls and it struggles over dust or fresh paint that has not cured. Wipe the path, let paint cure, dry fit the whole route, then commit to adhesion one stick at a time.
• Forgetting corners, exits and future edits. A straight drop looks simple until you reach the outlet and need an elbow or T split toward your PC and power strip. Confirm couplings and elbows before you stick, cut slowly and leave service slack at both ends so you can slide the lid open later without unplugging everything.
Who Should Wait or Buy Differently
Surface raceways are not ideal for every wall monitor project, and you should buy differently if you need cables fully inside the wall, you must relocate AC power to a new outlet behind the display, or your wall is heavily textured, brick, or concrete where tape will not hold. In those cases you should NOT buy another stick-on kit and hope for grip; instead consult an electrician for code compliant in-wall power, consider a monitor arm with integrated cable clips as a stopgap, or choose a freestanding desk mount until your wall and power plan are ready.
Frequently Asked Questions
Can you paint cord covers to match your wall?
Yes, the paintable models in this group are made to be customized with wall paint so the channel blends in. Clean the surface lightly, use thin coats, and let each coat cure before you snap the lid for final fit. You get the cleanest edge when you paint before final adhesion and touch up the joints after.
Will peel and stick damage a rental wall?
When applied to smooth, clean painted drywall, pre-applied tape installs with no drilling and usually removes with less repair than screws. Heat the edge gently and pull slowly if you need to reposition, then touch up any residue per your lease guide. Avoid textured, wall-papered, or freshly painted surfaces where adhesion is weak or removal could pull finish.
How do you know what size you need for power plus HDMI?
Count conductors first, then compare to rated capacity and interior size. A single thin lead fits a W0.59 H0.4in one-cord design, while power plus HDMI plus USB or Ethernet usually needs W0.94 H0.55in for 2 to 3 cords or W1.18 H0.6in with 1.1in by 0.52in interior for 3 to 4 wires. If your bundle feels tight in a dry fit, move up one width rather than forcing the lid.
Write Your Review
No reviews yet. Be the first to share your experience!